Our booth at the Plast Eurasia 2023 At the Plast Eurasia 2023 in Istanbul, Matsui cooperated with its local partners to present its first-class machines and solutions. The focus of our stand concept was the opportunity that our innovative products offer for a simple recycling process without compromising the quality of the products. In case you missed it, you can read more in the following article. You can also read more about ourreport on the event. SET-UP At our stand at Plast Eurasia, we presented a functioning mold demonstration that operated non-stop with polyethylene. We used a material ratio of 80% virgin, 18% recycled and 2% master batch. RESULTS The cycle time was 6.5 seconds and 48 products were made at a time Thanks to this recycling-oriented organization, we were able to enjoy a number of benefits throughout the production period: we saved energy and reduced the amount of material by around 20%, while also avoiding problems linked with metal and dust contamination. In the end, the molded parts still displayed a shiny and shimmering surface. Do you wish to discover more about the individual components of our set-up? Grinding & Dedusting SMGL3 Low-speed granulator with minimal dust generation for shredding recycled parts to a consistent size. Discover more ARV Aero remover of resin dust and fines to ensure stable plasticizing. Discover more Magic Catch Remover of ferrous metals and even certain mixed alloys in an ambient temperature of up to 120°C. Discover more Drying MJ5-i The MJ5-i dries the plastic pellets in a fraction of the time, reducing energy consumption while keeping the dew point of the plastic pellets constant at -40ºC right down to the core. Discover more Mixing JCGB Exact weight of materials without waste and perfect mixing according to specification. Discover more Injection molding Molded parts Material polyethylene. Plastic parts with high cosmetic value (shiny and glossy surfaces). We also displayed: Mold breather - Gas venting ejector pin The unique solution called Mold Breather was developed in Japan, which is a special ejector pin with 0.02 mm slots that increases the ventilation of the mold by up to 80%. Discover more