Overview Specifications Brochure Technical assistance? Call (+49) 69 1534 3013 MJ6-i Dehumidifying dryer with a honeycomb rotor for stable drying The new MJ6-i is the result of Matsui´s constant striving for high standards in treating polymers. It continuously monitors load demands and dials down energy consumption while keeping resin a consistent -60ºC dew point all the way to its core, drying it in a fast way to allow a faster start of process. Furthermore, the built-in self‑control option embedded in the equipment "i" (for intelligence) avoids that the drying process gets affected by the outside air temperature and humidity. Saving energy, ensuring quality The MJ6-i saves up to 83% energy through the continuous operation method: the resin´s temperature drops after drying and the evolution of air flow rate, preventing excessive drying and yellowing of products. In addition, the regeneration heating air is pre-heated with waste heat, as to reduce the required power consumption. "Honeycomb" dessicant wheel Matsui developed the “honeycomb” desiccant wheel technology, perfecting it throughout four decades. The spinning wheel is constantly presenting fresh, thirsty desiccant as moist air travels through every channel. As the wheel travels, “wet” desiccant is dried and ready to absorb moisture again. Engineered to perform maintenance-free, desiccant wheels routinely can hold dew point to -40ºC for years. Intuitive design of the touch-screen Settings on the new seven-inch touch-screen display present a smoother and simpler design. Thank to this, it´s possible to check the drying status, the machine's operating history, and to change the temperature. In addition it has a range of different languages to choose from. Small unique features Large, easy-access, hopper door Front-of-system access for simple routine maintenance Capture dust with cyclonic filter before it reaches the main filter Easy-clean feed line damper valve MJ6-i Model MJ6-i- -30 -50 -75 -135 -300 Power supply Voltage AC 200/400V 50Hz 3P Operating circuit voltage AC 100V, DC24V Apparent power 6.7kVa 7.2kVa 8.2kVa 13.5kVa 26.4kVa Breaker capacity 30/15A 50/30A 100/63A Air Supply Pressure 0.5 Mpa Flow rate 10L/h 20L/h Diameter 6mm Operating temperature 70-160°C (with ambient temperature 10-35°C) Dew-point -40 to -60°C Volume 30kg/50L 50kg/85L 75kg/130L 135kg/225L 300kg/500L Drying heater capacity 2.1kW 2.4kW 5.4kW 10.8Kw Drying blower output 0.28kW 0.42kW 1.15kW 2.55kW Conveying blower output (50/60Hz) 1.1/1.5kW 2.55kW Regeneration blower output 0.28kW 0.42kW 1.15W Regeneration heater capacity 1kW 1.5kW 2.1kW 3.1kW 5.8kW Outer dimensions WxDxH (mm) 985x611x2046 993x611x2369 1068x611x2369 1387x631x2626 1887x916x2689 Weight 265kg 275kg 290kg 395kg 715kg Alarm or protection cirucit Overheat protection (drying & regeneration temperature), blower overload, drying & regenerating blower reversal prevention. Check out the MJ6-i´s potential! Are you interested in this product and want to know more? Get in contact with us here!
